Overall rating: 4.8 / 5 from 28 reviews.
I wash cars five days a week. I had a Mosmatic quick disconnect on my pressure washer gun that fit very tightly and it was a pain to connect and disconnect foam cannons. The Automatic push-to-connect from McKillans was the answer to my problem. These are high-quality stainless connectors that work flawlessly. I will be ordering these again to replace my old garden hose connectors.
I have the auto-quick connects on everything else….SOOOO might as well get it for my pressure washing gun as well ! haha. I put this on my MTM Hydro SGS28, and LOVE IT ! This makes any pressure washing gun THAT much more fun to use and the ease of changing tips at lightening speed is fun. So I took my pressure washing gun a part to do this install, my quick connect from the factory was put on with some type of liquid, so I used my heat gun on low for about 30 seconds staying about 6-8 inches away rotating the heat gun around the threads. While it was clamped in a vice I took off the factory quick connect with ease, cleaned the threads, installed with the included PTFE tape, on the McKillans auto-quick connect tightened it all down snug. Tested all my tips to make sure they all clicked in and popped out cleanly and they do 110%. So I put my pressure washing gun back together snugged all the shells screws and tested it out, spraying water and it works flawlessly ! No leaks ! No nothing ! Just works and makes life easier !! I’m all about saving time when and where I can, it’s a no brainer to have ALL/EVERYTHING with auto-quick connectors. Thank you McKillans another fantastic product ! you got me sold again !
Great Quality!!!
Great product. Add this to your detailing equipment.
McKillans build the highest quality quick connects on the market. In addition, their automatic quick connects are a plus. I’ve ordered several kits already including their garden, pressure washer setup and these which provides the easiest connection to a foam cannon.
Great upgrade to the traditional 1/4 quick disconnect, was simple to put in. Original will be on pretty tight, but instructions gave awesome tip to remove and just make sure to put new one on tight with tape and works great! Easy on and off especially for foam cannons.
Love these. Would love to see these auto QC's pre-installed on the spray guns outside of the HF1 kit. Better yet, sell that sweet sweet black colored gun (in the HF1 kit) as a standalone spray gun.
Fantastic quality and super easy to install
Exactly what I needed, quick ship!
Easy fix. Really upgraded my Mckillins swivel gun. The factory should include this on new purchases.
Wow, the shipping was very fast and the fittings are of very good quality, I recommend them 100%.
Amazing
It didn't fit my Ryobi 1200 PSI 1.8 GPM Spray gun. Very disappointed.
I purchased the Automatic 1/4” NPT Stainless Quick Connect Coupler (2 pack) for my gas pressure washer gun and to use when I purchase a stubby pressure washer gun. I made the purchase after purchasing McKillans Automatic M22-14mm Quick Connect Kit and experiencing how nice the automatic quick connect feature is and how much I like it.
Originally signed up on the waitlist while this was in development, but never got notified of it's release. I get all my other emails from McKillans and there was nothing in my spam folder. But no matter. Purchased the set and installed onto my Swivel Pro without issue. Using the heat gun helped break loose the bond on the thread sealant perfectly. One word of advice, when you remove the old quick connect, use a pick or small screwdriver to clean the threads inside the assembly. Also use some air to blow out the residue. You'll get a better an cleaner thread connection. Then when you go to use it connect to the pressure washer without a nozzle and pull the trigger. Flush it out so nothing messes up your nozzle. You'll really like this connector when in use, especially when needing to quickly change tips or to your foam cannon! Enjoy!
Besr QD's ever. Medical grade SS and stout! I'll be ordering a bunch more for my home car detail /deionizer set-up once I get a list of all the QD's I need. LOVE YOUR PRODUCT !
Awesome! They work great
The quick disconnect work flawlessly.
Ok, purchased the quick connects to be used on an existing McKillans Swivel Pro gun. The fit seems good but I’m getting a slow leak in the newly installed connector. I don’t have a leak anywhere else in my connections. So while I love the ease of use. This leak is causing my pressure washer to continuously cycle. This cycling goes away when I connect a new, swivel pro gun with the default quick connect fittings. Solid connection. Any help would be appreciated, my old nozzle tip, works like a champ. Thank you in advance
Very solid and quality construction. Should hold up quite well. Push lock is the way to go.
Installed on my swivel gun pro. Made a great gun even better!
Arrived quickly and the fittings work awesome :)
Great product and it's easy to install. Just be careful not to over tighten onto your gun otherwise it may Crack like mine did.
Perfect great quality.
Great ordering service and quick delivery. I will be order again from you guys. Thanks
.
Finally a company designed an affordable and effective one-handed quick connect. I struggled with wet and soapy hands fumbling the connection between my stubby gun and foam cannon. Now it’s a quick click and I’m ready to go. Solid built solution!
Easy to install after using the tip to heat up the old one. Great upgrade for the gun!
